top of page
crashesinto_Dunkin Donuts restaurant_Orlando Fla_01.jpg

Safety Standards

Safety standards for storefronts are established guidelines and regulations that define acceptable levels of safety for the design, construction, and maintenance of storefronts to prevent crashes

New astm low speed impact testing standards to aid in lowering risk of storefront car accidents

Protective barriers are becoming an increasingly important component of preventing or minimizing the damage from such accidents. Now, a new ASTM standard quantifies the dynamic performance of vehicle protective devices at speeds of 50 km/h (30 mph) and lower. The procedure described in ASTM F3016 will establish a penetration rating for vehicle protective devices subjected to low-speed vehicle impact. The determined penetration rating will provide end users with the ability to select an appropriate barrier for site-specific conditions.

+ Download

Low speed vehicle barriers - astm standardization news - update

“Separating pedestrians from traffic and protecting storefronts from the impacts of cars that jump curbs as a result of operator error are compelling issues of public safety and building and public space design,” says Robert Reiter, a member of ASTM Subcommittee F12.10, and a storefront safety consultant. The proposed new standard will begin to address this issue by providing testing parameters for lower speed vehicle barriers.

+ Download

California, ab2161 - assembly bill quirk

Allowed insurers to consider the use of certain vehicle barriers at a commercial property as safety devices that qualify for a discount on the owner's insurance premiums, as approved by the Insurance Commissioner. The measure also encouraged the California Building Standards Commission to adopt a statewide standard for such safety devices.

+ Download

Midfield, alabama ordinance amendment no. 2071

Requires businesses to place a barrier in front of their building if parking is within 10 feet of the entrance to the facility. Current businesses are grandfathered in and will only have to install a barrier if they make changes to their building or parking lot. The city council passed the law after an SUV crashed into a dentist’s office, killing 6-year-old Camlyn Lee.

+ Read More

Orange county, fl, ordinance 2016-09

Requires childcare facilities to have safety barriers in exposed areas. The measure came as a response to the 2014 death of Lily Quintus, and serious injury of several other children, when a vehicle crashed into a childcare center in the county. Orange County also established the Lily Quintus Childcare Center Vehicle Impact Grant, providing up to $10,000 to assist childcare centers with installing safety barriers in front of their buildings.

+ Read More

City of malibu, ca ordinance no. 403

City passes new parking lot safety standards ordinance. Read ordinance.

+ Read More

City of artesia, ordinance no. 15-817 - california

Requires “vehicle impact protection devices” in existing and future parking lots for head-in spaces within 75 feet of outdoor seating areas. Then-Mayor Pro Tem (now Mayor) Lou La Monte introduced the measure after learning of the Buena Park Farrell’s Ice Cream Parlour tragedy.

+ Read More

Massachusetts - state rep carolyn dykema

Requires, among other things, that “vehicle impact protection devices” be installed adjacent to parking spaces that are angled between 30 to 90 degrees relative to an adjacent outdoor pedestrian seating area. The ordinance effort was led by Artesia City Council member Victor Manolo after his mother-in-law was killed and his daughter was severely injured when a vehicle crashed into them in front of Farrell’s Ice Cream Parlour in nearby Buena Park.

+ Read More

Miami/dade, fl ordinance no. 120887

Twice introduced legislation, in 2013 and 2015, to mandate the installation of barriers between certain parking spaces and retail establishments, but neither bill survived to a full vote.

+ Read More

A risk most people don’t think about by renaissance alliance

Requires that head-in parking located directly adjacent to a storefront be equipped with concrete security planters with a minimum depth of 40 inches, and that buildings located there have ground-floor windowsills placed at a height of 24 to 48 inches above grade.

+ Read More

How safe is your parking lot? By rob reiter and mark wright

+ Read More

Ordinances seek safer storefront parking areas, by mark wright

As driver behavior clashes increasingly with the built environment, Amherst, Miami-Dade, and ASTM International exemplify proactive approaches to changing safety conditions. They can see that America is no longer a “free range” society and have opted to work toward a new balance between unrestrained vehicle movement and public safety.Southern California press coverage of new ordinance to prevent storefront crashes

+ Read More

Vehicle security barriers within the streetscape by cpni

+ Read More

Apm 13th edition/engineering & technology – answers to review questions by national safety council - 2009

+ Read More

Dangerous by design: solving the epidemic of preventable pedestrian deaths (and making great neighborhoods)

+ Read More

Hazardous bus stops identification: an illustration using gis by srinivas s. Pulugurtha

+ Read More

Regulation of landscape architecture and the protection of public health, safety, and welfare by alex p. Schatz, j.D. Lafayette

+ Read More

Reducing vehicle/pedestrian conflicts in parking lots by barrett miller, ohst

+ Read More

Pedestrian protection at convenience stores by barrett c. Miller

+ Read More
bottom of page